Causes of Hot Car Brakes Especially when used while on long trips or for daily activities. If you are not careful, the car's braking function will decrease, and at worst it can cause danger.
Well, whatever the condition of your car or have experienced stuck car brakes, you must always be ready and alert. So, what are the causes of stuck car brakes? Here are some of them.
1. Damaged dust-proof rubber
One part of the brake components that often triggers damage to the brakes is the brake master itself. This happens because the component that is in charge of holding dust is damaged.
Especially if it is mixed with water which often occurs during floods. This can make water mix with dust, then dry and rust.
2. Rusted brake piston
In addition to the brake master, pistons are often the cause of stuck car brakes. Some of these elements are the caliper which functions as a piston housing retainer that can move back and forth when the braking process does not go well.
If this part does not work, then the process and function of the automatic car brake will not work. In addition to rusting, the disc pistons on the brakes that have been damaged can also be the cause of damaged car brakes. As a result, the performance of the piston is no longer elastic and reduces the function of the brake component itself.
There is a cause, of course there is also a way to overcome it. Simple and you can do it yourself. However, there are other parts that must get professional care to repair a damaged car brake function. How to?
1. Start Cleaning the Brakes
The simplest way is to start disassembling the parts related to the brake system. When you're done, clean every side and corner of the car's brakes.
If you find rust on some of the brakes, be sure to clean them with a special rust remover. However, if you are in doubt about how to disassemble the brake-related components, be sure to take the car to the nearest repair shop for maintenance.
2. Check the piston
Another part that needs to be checked next is the caliper pen on the disc brake. The method is quite easy, because you only need to remove and reinstall the part without using a canvas.
This check can be seen when someone is testing the brake pedal. Well, if under normal conditions, the piston will come out. Conversely, if the piston does not come out or is difficult to re-enter, then there are several damaged parts.
For further checking, it can be seen from the effectiveness of the piston housing. If you can't move freely, there will be damage that must be repaired by taking it to a repair shop.
3. Change oil
Not only the engine, the brakes also had time to change the oil. Replacing the old brake fluid with a new one is able to push the remnants of dirt so that it can all come out until only clean brake fluid remains. If you can't solve or find out the cause of stuck car brakes